2-90 Ton, A-Series Recirculating Chillers
Air-cooled, circulating chiller are recommended when cooling a reservoir of fluids such as central cooling pits, storage tanks, or quench tanks. They are often used for cooling metalworking fluid, hydraulic fluids, and other liquids. Evaporator selection will be based on the fluid being cooled and the level of contaminants in the process.
The A-series provides a highly customizable, air-cooled chiller with a fluid set point of 50–90ºF.
DOWNLOAD A-SERIES LITERATURE
Product Summary
• Indoor use
• Air-cooled, water-cooled, or split system
• Water, water/glycol, water soluble or oil-based fluids
• Fluid setpoint 50—90°F
• Capacities: 24,000 to 1,080,000 BTU/hr (see reverse for fluid temp and ambient as it varies with heat exchanger).
Temps can vary but will affect capacity.
• Temperature stability ±3°F, ±1°F optional
• Ambient temperature range 50—95°F
• UL 1995 certified
• 18-month parts and labor warranty
• 24/7 service and support
• Next day parts available
Base Configuration
• Air-cooled condenser
• Hermetic scroll compressor
• Brazed plate
• Hot gas regulator
• Phase monitor
• Cleanable air filters
• Fused disconnect
• R513A refrigerant
• Powder-coated cabinet
• c.pCO Mini controller
• Remote start/stop
• CSA compliant
Options
• Remote or water-cooled condensers outdoor
• Process pump
• 100-micron fluid filter
• Voltage options
• Motorized hot gas bypass (±1°F)
• Insulation
• Remote start/stop
• Remote Display (Up to 150’)
• Ambient tracking
• 50 and 60Hz power options
• CE & CSA compliant
• High Ambient and/or Fluid Temp
Here for You at Every Step
Dimplex is Committed to Making Your Chiller Purchase as Smooth as Possible.
Our experts will be delighted to help you develop a new system or optimise an existing one.
Unparalleled System Uptime
Precise Temperature Control
Highest Energy Efficiency
