IndyKool™ Industrial Machine Cooling
IndyKool™ Laser Chiller
|
Laser:
Call sales dept
for Chiller quotation
or email
salesdept@dimplexthermal.com
In Stock Laser Chiller:
HCV10000PR-NF-FILT
|
Sizing Information:
- Laser Model
- Resonator Heat Load
- Optics Heat Load
- Laser Flow Rate
- Pressure Drop Through Laser
- Leaving Fluid Temperature
- Temperature Stability Requirements
- Water Quality Requirements
- Linear Motors
Types of Lasers:
- CO2 Lasers
- Nd:Yag
- Diode/Solid State |
|
Laser Installation Tips:
- Piping to and from chiller to process should be of non-ferrous
construction
- Outdoor installations for glycol only designs anything else a special
design must be used
- Distance chiller is located from process should be noted
- Overhead piping will require anti-back flow kit
Water Quality Requirements:
|
Typical Laser Chiller Features:
- Non-Ferrous
- Over temp Interlocks
- Hot Gas Bypass
- Filters
- High Pressure Pumps
- Pressure Relief Bypass
Other Laser Options:
- Braze Plate Evaporator
- Armaflex Insulation
- Second Circuit for Optics
- Maintenance Heater |
- Water should be clean and 100 micron or better
- Bacteria inhibitors should be used and should be noted when quoting
since many inhibitors create problems with seals.
- De-ionized water, for water qualities over 200,000 M-ohms resistivity
only plastic or stainless steel should be used
|
| |
Chiller Models:
MasterChill Series
C-Series "Closed Loop"
A-Series "In Line"
W-Series "Sealed Systems"
|
