Koolant Kooler ™ CHILLER OPTIONS for A, C, W Series
Heat Exchangers
-
Fixed Bundle Heat Exchanger: Standard construction of stainless steel tubes with steel shell and baffles. Available in non-ferrous materials or all stainless steel construction. Designed for high efficiency, long life and minimum fouling.
-
Cleanable Heat Exchanger: Constructed with heavy channel sides and stainless steel tubes to resist abrasion. Used where contamination from swarf, chips or scale could occur causing blockage. The sides can be removed without the altering coolant or refrigerant connections.
-
Brazed Plate Heat Exchanger: Nickel or copper brazed
Air Cooled Remote Mounted Condenser
Designated with an R in the third location of the unit model number. Units are designed with two seperate sections so that the condenser can be installed in a secondary location (i.e. rooftop, outdoors, or separate room). The purpose is to eliminate the heat rejection into the process area and also to reduce the noise level.
Reservoirs
Specialized pumps
-
Centrifugal
-
Gear
-
Vane
-
Turbine
-
Diaphragm
-
Multi-stage
-
Dual
-
Base mounted
Outdoor Chiller Installation
Designated with an O in the 3rd location of the unit model number. This unit is designed with the proper controls for low and high ambient conditions and protected against inclement weather.
Compressors
Electrical Controls