PolyKool Plastics:

DTS has an outstanding history for providing chiller systems and cooling solutions to the Plastics Industry. Dimplex Thermal Solutions knows that plastic molds and rails are susceptible to sweating when the chilled water loop is too cold - resulting in spots or deformed parts.  Whether operating injection molding, blow molding, thermoforming, transfer molding, reaction injection molding, compression molding, or extrusion equipment, DTS offers a chiller that will satisfy all of your requirements with reliable temperature stability so your product quality is not compromised.

• Custom controls
• Single module sizes from 0 – 90 ton & multi-modules available
• Special footprint
• Tight temperature tolerance
• Sound level requirements
• Stainless steel construction
• Special fluids like hydraulic oil or acid
• Integrated chiller controls with facility software
• Wash-down up to IP69K
• Double wall insulated stainless steel reservoir
• FDA, USDA/MID, cGMP, 3A approved
• Digital temperature controllers
• In-house testing or in-field with a test unit
• Sanitary construction
• Preventative maintenance contracts
• Startup assistance
• ISO 9001 certified
• Global 24 hour service and support

Injection Molding:
Sizing Information
30 lbs/hr polyolefin's = 1 ton of cooling
50 lbs/hr polystyrene = 1 ton of cooling
45 lbs/hr PVC = 1 ton of cooling
40 lbs/hr PET = 1 ton of cooling


Extrusion:
Sizing information
50 lbs/hr polyolefin's = 1 ton of cooling
75 lbs/hr polystyrene = 1 ton of cooling
65 lbs/hr PVC = 1 ton of cooling


Blow Molding:
Sizing Information
40 lbs/hr polyolefin's = ton of cooling


Hydraulic Cooling:
Hydraulic cooling = 0.1 tons of cooling per 1 HP